Technical Library

10/15/2008

Optimize project economics, well design and drilling efficiency with application of SET solid expandable technology.

09/09/2003

For years, the reduction of tubular inside diameter (ID), or “telescoping effect,” limited the exploration and production of oil and gas. Using conventional technology, operators faced significant loss of ID in the course of the normal drilling process, during reentry and deepening of existing...

11/01/2010

By ensuring optimal hole size, well designs using solid expandable tubulars have a far-reaching effect on drilling, evaluation, completion and life-of-well solutions. Enventure Global Technology's Kevin Waddell, Jerry Fritsch and Kristaq Mitrushi discuss the growing influence of solid...

09/01/2011

An operator needed to overcome drilling obstacles in their Gulf of Mexico, HPHT well.

Three SET® Systems were installed in this well and enabled the operator to reach the planned target. 

09/01/2013
In the Marcellus Shale, fracturing rates and pressures can be substantial, but there are other problems also associated with completing these wells, which can promote casing failure or compromise the pressureintegrity of a well. A...
04/20/2008

Operators encountered trouble zones, which escalated non-productive time (NPT) in an offshore shelf. By using Solid Expandables they were able to reduce the NPT, isolate the zones, achieve a 130% increase in the flow area, and realize a 50% increase in inside diameter (ID) at total depth (TD)....

06/11/2018

Design specifications for SET Systems