Technical Library

Objective

01/05/2008

In order to facilitate a lower zone fracture treatment, three sets of perforations required a high-pressure, gas-tight isolation treatment that would maximize casing ID for completion tools. The solution provided a successful, gas-tight isolation of the three sets of perforations...

07/14/2011

An operator in the northern Colorado, Piceance basin discovered a part in 4-1/2 in. base casing. The casing split meant they would not be able to complete the lower six stages of the well. The operator initially used conventional methods in an effort to repair the damaged casing to recover the...

12/28/2011

The Operator had two sections of perforations in 4-1/2 in. casing that needed to be repaired. They required a solution that would repair the 4-1/2 in. casing and still maintain sufficient ID for this well to be used as a power water injector well.

09/01/2013
In the Marcellus Shale, fracturing rates and pressures can be substantial, but there are other problems also associated with completing these wells, which can promote casing failure or compromise the pressureintegrity of a well. A...
09/30/2013

An Operator, in the Ardmore Basin, was unable to put a well onto first production due to casing damage at a 5½” to 4½” casing crossover.

05/26/2015

A major Operator in the Anadarko Basin of Oklahoma lost pressure integrity during completion / frac operation.  A 3-1/2" ESeal HP Liner straddled the parted packer, restoring pressure integrity, and enabling the Operator to continue their completion / frac operations

05/01/2012

The challenge was to cover and isolate a hole in the vertical section of a horizontal well to continue with the planned high-pressure 14-stage fracturing program.

06/01/2018

ESeal™ HP Patch systems: A high-performance wellbore repair solution.

These systems utilize a higher yield-strength material than standard ESeal systems. The material’s increased burst and collapse ratings provide enhanced performance and reliability.

From re-completions to field...

10/15/2014

Enventure’s ESeal™ casing patch solutions provide a robust, permanent alternative to unreliable cement squeezes while maximizing ID and maintain the largest production conduit possible. ESeal casing patches are effective solutions for addressing multiple casing integrity issues.

Pages