Challenge: Design and implement a field-level remediation plan using cased-hole SET® Solid Expandable Tubular technology to facilitate production restoration.
Get back on planned drilling program and finish the well with an adequate hole size to evaluate potential production zones at TD.
In order to facilitate a lower zone fracture treatment, three sets of perforations required a high-pressure, gas-tight isolation treatment that would maximize casing ID for completion tools. The solution provided a successful, gas-tight isolation of the three sets of perforations...
Larger SET® Systems were designed to mitigate the risks inherent in drilling complex and exploratory wells.
Larger solid expandable systems are planned as a basis-of-design (BOD) in the upper portion of the wellbore. This enables operators to maintain internal diameter (ID) early in the...
To completely isolate the main pay zone (MPZ) from lower residual oil zone (ROZ) with options to set conventional liner in future if needed for conformance work. Installation of 5-1/2” x 7”, 23 lb ESeal Liners to isolate the upper perforations in each well would enable injection through newly-...
A leading onshore natural gas producer working Northern Louisiana experienced problems along the vertical section of a horizontal development well.
Enventure deployed two ESeal Liners enabling them to continue the planned completion.
ESeal™ HP Patch systems: A high-performance wellbore repair solution.
These systems utilize a higher yield-strength material than standard ESeal systems. The material’s increased burst and collapse ratings provide enhanced performance and reliability.
From re-completions to field...
Enventure's 4-1/4 x 5-1/2 inch, 17 lb/ft ESeal Liner was installed in a Barnett Shale 3000 ft lateral wellbore to isolate existing perforations while allowing fracturing of new shale colume between old perforation clusters.
The ESeal Flex expandable system is an expandable solution primarily designed for well completions, stimulations, and workovers.