Technical Library

Objective

09/12/2004

Solid expandable tubular technology presents an opportunity to significantly boost the production capacity of wells by increasing the size of the completion. As such, it offers an economically attractive and environmentally friendly option to breathe new life into gas fields. It is flexible in...

04/11/2007

A Corrosion across the entire 1,100 ft. of 7 in. casing installed in a natural gas liquids (NGL) storage cavern risked NGL leakage into the surrounding formation.

02/18/2015

A major Operator in the Marcellus required a solution to seal squeeze perforations which would have to withstand high pressure frac operations. The area Regulatory Agency had suspended operations, not allowing completion of the well due to poor cement behind the production casing. The Operator...

03/30/2015

An Operator in the West Virginia Marcellus Shale required a cost-effective solution to seal off old perforations to enable high-pressure refrac operations.  The ESeal RF Liner was successfully installed in the horizontal wellbore and tested to 9,500 psi.

03/18/2015

A major Operator in the Permian wanted to start its frac program on a well, but found that nearly 200 ft of the 5-1/2 in. production casing had collapsed.  The ESeal HP Liner ID was sufficient enough for the planned frac treatment to be completed ensuring a return on the $2M investment to drill...

05/30/2018

The ESeal Flex expandable system is an expandable solution primarily designed for well completions, stimulations, and workovers.

05/30/2018

We’ve expanded the Operating Envelope of Expandable Liners for Precise and Reliable Refracturing Applications

The newly enhanced ESeal RF and ESeal RFHT (High-Temp) Refrac Liners provide the industry’s highest strength and temperature ratings...

06/01/2018

In cased-hole environments, ESeal Liner systems provide a solution to mitigate troubled casing intervals in onshore and offshore applications.

06/01/2018

ESeal™ HP Patch systems: A high-performance wellbore repair solution.

These systems utilize a higher yield-strength material than standard ESeal systems. The material’s increased burst and collapse ratings provide enhanced performance and reliability.

From re-completions to field...

10/15/2014

SET technology is the result of a cold-working process that permanently deforms the pipe without any additional heat. The procedure inherent to expanding tubulars takes the steel beyond its elastic limit into the plastic region of the stress-strain curve, while remaining safely below ultimate...

Pages