Technical Library

Objective

05/05/2006

Get back on planned drilling program and finish the well with an adequate hole size to evaluate potential production zones at TD.

09/09/2003

For years, the reduction of tubular inside diameter (ID), or “telescoping effect,” limited the exploration and production of oil and gas. Using conventional technology, operators faced significant loss of ID in the course of the normal drilling process, during reentry and deepening of existing...

07/14/2005

Remove recovery obstacles in openhole laterals by combining SET® solid expandable systems with intelligent well technology.

01/01/2012

A major east coast Operator needed to cover and isolate two sets of perforations in the base casing. An ESeal Liner was chosen because three previous liners were performing successfully in the same area for this Operator. The perforations needed to be sealed so water influx could be stopped to...

11/01/2013

A major Alaskan Operator’s 22-year-old well had decreased production levels, had casing integrity issues, and was now producing too much water. An economical yet effective solution was needed that would not only permanently isolate the water-producing perforations in the production liner but...

02/12/2009

The Operator utilized Enventure's ESeal Liner expandable technology to isolate zones and provide a high-pressure environment for an aggressive re-frac program. The treatments paid out in ~2 months and increased production 700% where cement squeezes failed.

05/30/2018

The ESeal Flex expandable system is an expandable solution primarily designed for well completions, stimulations, and workovers.

06/01/2018

The ESeal Patch is a single-joint, solid steel, expandable casing patch for operators who need a permanent, inexpensive casing patch solution that reliably restores well integrity.

05/30/2018

We’ve expanded the Operating Envelope of Expandable Liners for Precise and Reliable Refracturing Applications

The newly enhanced ESeal RF and ESeal RFHT (High-Temp) Refrac Liners provide the industry’s highest strength and temperature ratings...

Pages